THE GREETS 1

The body of the GREETS 1 Smart Video Doorbell measures 142mm in height (147mm with the base), 57mm in width (60mm with the base) and 34mm in depth (41mm with the base).

Equipped with ultra-wide 166 degrees all-glass lens the GREETS 1 should easily record everything happening wherever you place it at 1080p resolution (the PIR sensor is right beneath the lens whereas the IR LED is located on the left - right as you see it - of the PIR sensor).

The wireless chime button is located at the lower end of the doorbell (this also acts as a detection LED - blue and red - a reset button is located on the right side).

As you can easily tell the plastic wall base/bracket has two mounting spots on it and two copper contacts which you can use to attach the GREETS 1 directly to the power (that way you can skip having to recharge it).

The doorbell itself also has two copper contacts and two screws which hold the battery cover.

Removing the battery cover reveals the two 5000mAh (18.5Wh/3.7V) rechargeable lithium-ion batteries.

A microSD card slot is located just over the batteries as you can see from the above picture.

The microUSB charging port is placed at the base of the doorbell.

The bundled wireless chime features a large mono speaker and two activity LEDs (pairing/working) at the front.

Three buttons are located on top and from here you can adjust the volume level (4 Levels), choose a ringtone (4 available ringtones) and reset the chime.

The battery compartment is located at the rear and as for the microUSB charging port that's located at the base.