THE REAPER RFI25CBA

The Viotek REAPER RFI25CBA is a 24.5 inch IPS LCD monitor with a diagonal length of roughly 63cm.

1st thing to do once you take the screen out of its box is to attach its stand which you can easily do just by mounting it at the rear as seen above (tool-less mechanism).

After that you'll just need to mount the base (single screw).

The RFI25CBA doesn't feature a curved screen so although i do expect some to like that, some will not.

Lowest position from your desk is set at 81mm whereas the highest is set at 196mm (also do notice the LEDs on both corners of the screen).

Top and side bezels are less than 3mm thick so this is good news for people who may want to grab two or three RFI25CBA for a multi-monitor setup. On the other hand, the bottom bezel is 15mm in thickness (although that doesn't really matter).

Turning the screen around we find two more LEDs at the top.

The metal stand Viotek has used has both an headset holder and internal cable management.

At the rear we also find the joystick control, Kensington lock and all of the connectors (power, type-C, 2xHDMI, DP and 3.5mm output).

The stand of the REAPER RFI25CBA pans (15 degrees on either side) and tilts (-5 degrees down and +20 degrees up) so it's quite more versatile than what some other similar models come with.

Perhaps what really sets the REAPER RFI25CBA apart however is the portrait orientation (complete with a g-sensor which automatically changes orientation).