BUILDING THE SYSTEM

As always, the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space.

As with many recent towers the PSU area has plenty of room inside (220mm).

Mounting a full sized ATX motherboard is nothing for the Armis AR7X EVO TG ARGB.

Goes without saying but with room for up to 178mm tall CPU coolers you should be able to use any model.

If you remove the far right piece of the PSU shroud you can mount any radiator you'd like (just as long as it's not over 360mm in length).

For people with tall RAM modules like the ones used here using a very thick (60mm) radiator at the top will not happen.

Mounting even 420mm long graphics cards is not an issue unless you decide to put a radiator at the front (in that you should be able to mount graphics cards up to 360mm in length even if you use a thick radiator like the one here).

Surprisingly enough mounting an 420mm long radiator is also possible at the front as you can see from this picture (if you keep the stock 120mm fans you will not be able to use all mounting holes).