SETUP

The easiest way to setup the Personal Cloud Pro is to install the latest Seagate Dashboard software. Once run it you will list all the connected Seagate external drives and will give you a number of available backup options.

To head onto the web interface you can click on the Go To Seagate Personal Cloud 2 Bay link seen above.

Through the dashboard software you can also check the installed firmware version and the drive letter assigned onto the Personal Cloud Pro.

Once on the web interface you will be asked to agree to Seagate's terms and conditions and then the software automatically will download not one but two firmware updates (the 2nd slightly changes the design of the web interface along with the Seagate logo displayed).

Last stop before you can use the Personal Cloud Pro is to configure the drives and as you can all see by default these are configured in RAID 1.