THE XPREDATOR II EXTERIOR

 The aggressively designed XPredator II measures 595mm in height, 232mm in width and 559mm in depth.

More than half of the left side panel is taken by a clear acrylic window (why AeroCool didn't use a larger one that i don't know).

The fascia has several mesh panels and three 5.25" optical bays that feature quick-release clips.

Behind the fascia AeroCool has placed an air-filter (the 5.25" bay covers also feature filters).

Unlike most towers the two 140mm LED fans placed at the front are secured on a removable filter and not on the chassis.

Although not listed in the specifications you should be able to mount an 240mm radiator at the front (we will check that later on).

At the top we see a 3.5/2.5" drive dock, four USB 2.0 ports, two USB 3.0 ports, power and reset buttons, power and HDD activity LEDs and two low/high speed fan controllers.

The top is almost entirely taken by 10 vents which you can raise with the help of a switch to allow the exhaust fans inside to push hot air out of the tower.

Moving at the rear we find 4 rubber grommets at the top, a 140mm exhaust fan, 10 PCI expansion slots and the PSU area.

A removable air-filter is placed right beneath the PSU area (unfortunately it only gets removed from the rear and doesn't also cover the bottom fan area).