ASSEMBLY

Although one can always start to assemble the chair from the backrest, we prefer to start by mounting the wheels to the base as seen above.

After that comes the class-4 gaslift with its plastic cover.

70mm wheels are probably the best for a gaming chair, not too large to hit on things and yet not too small to easily break or have difficulty moving.

The seat comes with two green elastic bands and three bars for increased support and durability.

Each armrest is attached with the seat by 4 Allen screws (8 in total).

4 more Allen screws are required to secure the z-support height and tilt/rocking mechanism onto the seat.

Attaching the height adjustment and tilt/rocking function levers is very easy, just make sure that you push them all the way in.

There are two Allen screws mounted on each side of the backrest along with a small X shaped cut in between as seen above.

Once you’ve secured all Allen screws you can use the bundled covers.

With the top end of the chair finally ready all that’s left is to place it onto the class-4 gaslift.