THE WOOJER VEST EDGE

The 2Kg heavy Woojer Vest Edge is made out of synthetic fabric, foam padding and plastic and features a total of six OSCI TRX52 transducers located at the front (2), both sides (2) and the back (2).

A convenient control mechanism is located on the left side of the vest and from the center button you can power it up/down and enable bluetooth pairing (press it for 5 seconds), while from the top/down buttons you can increase/decrease the level of vibration and from the left/right buttons you can increase/decrease the volume.

From left to right at the front of the control mechanism we see a 3.5mm audio-in port, USB-C audio-in port, charging port and an 3.5mm audio-out (headphones) port (a small reset button is located on the left side of the control mechanism).

Thanks to its adjustable straps the Vest Edge stretches from roughly 80cm (31 inches) up to roughly 180cm (70 inches).

One transducer is located on each of the sides seen above.

Two more are located on the upper rear back and two on the front (one under the control mechanism and the other on the opposite side).

Instructions on how to use the straps to get the best fit and maximum comfort with your Woojer Vest Edge are printed on the vest itself.

A very useful carrying handle is located at the top.

The company logo is not only present at the front of the vest but also at the rear.

Worth noticing is that the control mechanism has an LED ring around it which flashes red for when the battery is almost empty, red when charging, green when it's fully charged, blue and red for when in bluetooth pairing mode and blue when connected.