THE DEEP SILENCE 4 EXTERIOR

Just like the rest of the Deep Silence line the 480mm long, 380mm tall and 200mm wide Deep Silence 4 features a simple yet elegant design.

Both side panels are simple but as you can see there are several intake holes on each side of the front fascia.

The front fascia has two parts, upper and lower and both feature polished/brushed plastic plates on them.

However only the top has a working door which opens from right to left (noise-absorbing material is placed on its interior).

Once again at the top of the front Nanoxia has placed their logo.

Right beneath the Nanoxia logo the Deep Silence 4 has two easy removable 5.25" drive covers complete with noise-absorbing coating on the inside, two channel fan controller and the reset button.

The I/O is placed (once again) at the top of the fascia and includes the on/off power button (the ring is the power LED), one USB 2.0 port, 2 USB 3.0 ports and the typical 3.5mm headphones/mic plugs.

A single 120mm intake fan with its air-filter is placed on the lower part but to access it as you can see from the above pictures you will need to remove the entire fascia.

There's also a 5.25" to 3.5" adapter mounted in the Deep Silence 4 which makes sense since in the bundle there's an 1.44" bay cover.

At the rear top we see one more fan spot for an 120/140mm exhaust fan.

The rear of the case has a 120mm exhaust fan, two grommets, 4 PCI covers and the PSU area.

Nanoxia has placed a long removable air-filter at the base of the tower.