BUILDING THE SYSTEM

As always, the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space.

Needless to say, you will First need to attach all 6 bundled fans either with the anti-vibration mounts (like I did) or the fan screws.

A full sized ATX motherboard is nothing for the Flux Pro Noctua Edition (even an E-ATX model would leave room for the rubber grommets around it).

With enough space for 190mm tall CPU air coolers there's no limit to what you can mount here.

Worth pointing out is that the Flux Pro Noctua Edition can accommodate up to one NL-LC1-42 420mm AIO Liquid Cooler (either top or front).

For demanding users, the ability to add a 360/420mm long and 90mm thick radiator at the front will surely stand out.

There's virtually no limit as to what graphics card one may use with the Flux Pro Noctua Edition (455mm max).

We also need to speak about the PSU area which has plenty of space even for the PRIME TX-1600 Noctua Edition by Seasonic.

Just remember to replace the default rear PSU mount with the bundled one (unless for some reason you want the modular ports facing backwards).