THE PLAYA RGB EXTERIOR

Measuring 480mm in height, 432mm in depth and 211mm in width the 5.76Kg heavy Playa RGB is a medium sized mid-tower.

As with most similar cases the entire right side panel is made out of tempered glass.

What also stands out from the right side is the RGB lit I/O which includes the On/Off power button, RGB mode button, two USB 3.0 ports and the typical headphones and microphone ports.

The fascia is primarily made out of plastic but the lower right side actually features a small tempered glass panel (there's also a RGB LED strip at the center).

You can of course remove the fascia by pulling it from its base to access the interior fan/radiator area.

Here you can mount up to three 120 fans and/or a 240/360mm radiator.

Most of the top area is covered by a magnetic air-filter beneath which you can install two 120/140mm fans and/or a single 240/280mm radiator.

At the rear of the case we find an 120mm exhaust fan, 7 PCI expansion slots and the PSU area.

A removable air-filter is located underneath the PSU area (unfortunately not a magnetic one).