THE NAVIS RGB 280

The radiator, tubes and pump/waterblock combo is something we've seen far too many times already (the pump of this model however does stand out).

As you can all see the aluminum radiator is indeed roughly 28mm in thickness.

An empty/fill port is located at the end of the radiator but as you can see it's not to be used.

In terms of FPI (fins per inch) the radiator used in the Navis RGB 280 has a count of 18.

SilentiumPC used rubber tubes roughly 380mm in length something we don't see much (most models don't have tubes over 350mm in length).

On top of the pump SilentiumPC has placed their logo and some waves all of which illuminate once the AIO is in operation.

The RGB illumination extents all the way around the pump.

Both tubes can rotate at the base of the waterblock/pump combo to simplify installation.

It may look somewhat simple in design compared to some other copper bases we've seen in the past but the one used with the Navis RGB 280 has no visible machine marks on it.

The pump is powered by a SATA power connector and also features two 4-pin RGB connectors (male/female).

Both Sigma HP RGB 140mm fans feature anti-vibration pads on all 4 corners, two RGB mainboard connectors and a 4pin PWM connector.

With the fans mounted the Navis RGB 280 now measures roughly 52mm in thickness.

In the above pictures you can see some of the available lighting colors (could be just a tad too bright for some people however).