THE PURE LOOP 2 FX 360MM

At first glance what stands out from the Pure Loop 2 FX 360 AIO is its aluminum-style block and of course the 397mm long aluminum radiator.

As expected, the radiator is just 27mm in thickness for optimal compatibility with cases.

A fill/drain port is located on the far end of the radiator so you might want to use the bundled coolant after many months of use.

With a high FPI (fins per inch) count of 21 this aluminum radiator is clearly not the same model as the one used with the Pure Loop series.

Placing the pump between the 400mm long sleeved tubings is not an approach we’ve seen in the past by other manufacturers.

The top of the pump features a brushed aluminum like piece (same as with the Pure Loop models) and around we find several ARGB LEDs (be quiet! doesn’t state how many but I count at least 8).

Just like its predecessor the Pure Loop 2 FX AIO models feature rotatable tubes for easier installation.

The nickel plated copper cold plate is large enough for any CPU model in the market (although not supported it should be sufficient even for TR4).

The 3 Light Wings 120mm high-speed fans can achieve speeds of up to 2500RPM to produce up to 52.3CFM of airflow and 2.6H2O of air pressure with just 31dBA of noise (these fans feature a total of 18 ARGB LEDs each in the exterior ring).

Of course, these fans feature rubber anti-vibration pads on all corners.

With the Light Wings 120mm high-speed fans mounted the radiator now measures just over 53mm in thickness.