THE EK 240 AIO D-RGB

Even though the main body of the EK 240 AIO D-RGB is nothing we haven't see countless times in the past the rather thick pump/waterblock does stand out.

EK Water Blocks has used an 27mm thick aluminum radiator.

FPI count (find per inch) is set at 19.

A fill/drain port is located at the top of the radiator but by accessing it you’re voiding the warranty.

Once again, the aluminum radiator is connected to the pump/waterblock combo via two 350mm long black sleeved low permeability tubes.

EK Water Blocks has placed their logo on top of the acrylic pump cover.

Here you can see an exposed model of the pump (marketing material).

As with most AIO models in the market today both tubes can rotate up to roughly 90+ degrees from the base.

The pure copper coldplate comes ready with a thin pre-applied layer of thermal conductive material on it.

This time over EK Water Blocks has used their new EK VARDAR S 120ER RGB fans which can spin up to 2200RPM to produce up to 66.04CFM of airflow and 2.89 mmH2O of air-pressure with just 36.4dBA of noise.

With both fans mounted the thickness of the radiator jumps from 27mm to just over 52mm.

Here you can see the top of the pump in all its glory.