THE LANMODO VAST

The plastic enclosure of the Vast system measures 224mm in length, 103mm in height (base included) and roughly 67mm in width.

With an 8.2 inch wide IPS screen you should have no problem noticing everything down to the tiniest detail.

At the top of the enclosure we find the switch signals (between the front and rear camera - if the rear camera is installed), menu (can adjust brightness and contrast levels), screen rotation (useful if you use the suction cap mount), power on/off, scroll up/down, color/BW and cable input buttons.

The 28mm 7G full glass HD optical lens of the Vast can output video at Full HD (1080p @ 30fps) with a viewing angle of 36 degrees and a maximum night vision range of 300m.

You can rotate the lens and move them left, right, up and down to achieve the best possible view.

Two perforated sections are placed at the front of the enclosure.

Lanmodo gives you two ways to mount the Vast system in your car, either by using the bundled base or by using the suction mount (either way you will need to use the mounting hole located at the base of the enclosure).

For this review we used both the suction cup mount and the base which alone is not very large as you can all see.

Adding the non-slip mat changes that and is basically what keeps the Vast system from falling off your dashboard.