THE CHALLENGER GO

Although designed for LAN events the Challenger Go is by no means a small keyboard (measures 497mm in length, 202mm in width and 24mm in height).

To showcase its size we placed it right next to the Lobera Supreme a large keyboard which we were all surprised to see that it's a tad smaller compared to the Challenger Go.

Tt eSPORTS has placed their dragon logo at the lower mid center of the keyboard.

10 fully programmable macro keys are placed on the two ends of the keyboard (via the keyboards 4 different modes these keys can be used with up to 40 macro commands).

F1 through F7 also double as multimedia keys when used with the Fn key (previous, play/pause, next, stop, mute, volume down/up).

F11 can also be used to switch between all available illumination levels while F12 can change profiles on the fly.

At the front of the keyboard we find the miniUSB port for the cable and two full size USB ports which can be used with devices that require up to 100mA (since the Challenger Go only has a single USB connector and no DC in this was expected).

Four rubber feet (two of them rather large), a small canal from where you can route the cable so it doesn't interfere with the USB connectors and two height adjusters are placed at the base of the keyboard.

These height adjusters keep the top end of the keyboard roughly 15mm from the desk.

Both the miniUSB and the USB connector are gold plated while the 2m long cable is braided.

Here we have placed pictures of the highest and lowest illumination settings with and without the Tt eSPORTS logo.