THE KUVEN A1 PRO
Just like the original Kuven the Kuven A1 Pro is primarily made out of hard plastic and aluminum.
In terms of size the Kuven A1 Pro is quite large especially when compared to a compact headset like the REVO Wireless by Jabra.
Just like its predecessor the Kuven A1 Pro features angled earcups to better fit your ears (an aluminum plate is placed on the exterior of both).
The company name and logo are printed just over the earcups.
You can find the product name on the exterior of the left earcup (nice Greek font here).
As you can all see the flexible unidirectional microphone can rotate vertically for roughly 170 degrees.
There's also a purple LED at the front of the microphone which turns on when it's muted.
The angled earcups feature large and thick earpads (cushions) made out of real protein.
Both earcups can fold to reduce the size of the headset for easier storage.
Once again Tesoro has used a thick headpad again covered by real protein.
Each side of the headband can extend up to 3cm via 11 available increments.
Left and right markings are available on the interior right above the earpads.
The Kuven A1 Pro use a HDMI like gold plated plug to connect to the control station so unfortunately you can't use them without it.
The Control Station is quite small (although certainly not as small as some in-line models) and is made out of hard plastic just like most parts of the headset.
It has three buttons at the top (channels, mute microphone/speakers) and a large volume control knob (all have purple LEDs).
The headset port is placed on the left side of the station while the USB port is placed at the front.