THE SILENT BASE 600 INTERIOR

The interior of the Silent Base 600 may not match that of its larger brother but it's still quite spacious.

All three 5.25" optical bays feature tool-free lock mechanisms.

There are holes for an extra 2.5" installation at the bottom of the 5.25" cage.

There's an empty area right beneath the 5.25" cage which allows for installation of graphics cards up to 413mm long.

The 3.5" drive cage is placed at the bottom of the tower and can hold up to 3 drives.

You can move the 3.5" cage at the empty area right above (you will need to remove a couple of thumbscrews placed at the front and rear) or place it inside the 5.25" cage by using the 2.5" holes we talked about earlier (thus allowing for the installation of a 140mm radiator at the front).

Designed in Germany, Assembled in China (has a nice ring to it right?).

Be quiet! has also placed two 2.5" drive trays vertically on the other side of the mainboard tray.

These trays are very convenient and although it's not the first time we've seen something like that not many manufacturers have them in their cases.

Aside having a mounting spot for a 120mm fan the right side panel is also dressed with noise-insulating material.

There are 4 rubber grommets on the mainboard tray which can be used for cable management.

All 7 PCI expansion slots are secured in place via regular thumbscrews.

You can install yet another 120/140mm fan or radiator at the bottom of the Silent Base 600 just as long as your PSU is not over 160mm.