THE SYN 360

In terms of looks the SYN 360 may not be that much different compared to other AIO models but the pump/waterblock/display logo does stand out.

The 397mm long aluminum radiator is almost 27mm thick.

As you can see from the above picture the FPI (fins per inch) count of the SYN 360 radiator is just shy of 21.

Valkyrie has used long fittings on the side of the radiator as seen above.

425mm long FEP braided tubes is certainly not something we see a lot with AIO models.

The 2.4" color display has two magnetically attached plastic pieces on the sides which by default are red.

You can replace these with the bundled blue/green ones which don't look particularly great however (works well with the white version of the SYN line however).

The USB-C port with which you need to connect your motherboard and an MicroSD card slot inside which you can store media to display on the screen are located on the left side.

Valkyrie ships the SYN 360 with an 16GB Netac Pro MicroSD card already mounted.

Even though there's a thermal paste tube bundled there's a thin layer already applied on the coldplate.

Removing the layer reveals no machine markings.

The three X12E 120mm fans can reach speeds of up to 2150RPM to produce up to 80CFM of airflow with 3.14mmH2O of air pressure at just 29dBA of noise.

Aside featuring RGB LEDs these fans also have rubber coated corners.

With all three fans attached the thickness of the SYN 360 increases to almost 53mm.