THE TN1600P

The POE injector is by no means small but it helps send electrical power to the camera just by using the Ethernet cable something which is extremely convenient especially for outdoor installations.

For an outdoor camera model the TN1600P is not very large and measures just 147mm in length, 74mm in width and 77mm in height while it weighs 553g.

I have seen sturdier and much thicker wall mounts than the one Compro ships the TN1600P with but we had no problems with it during installation.

Compro has placed their logo at the rear left and right of the sunshield.

The auto-focus lens of the TN1600P have a 60 degree horizontal angle of view and 1/3" 2MP CMOS sensor of the TN1600P can record video with resolutions up to 1600x1200p at 15 frames per second (30 however would be ideal).

Adjusting the position of the sunshield is very easy since it's done via the screw at the top.

You can find the 2D barcode at the rear end of the device as seen above.

For good or bad the TN1600P is targeted mostly towards people who care not about hooking it with an alarm system, a microphone and a speaker so the only connector found at the end of the cable is the Ethernet one.