20 - 04 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

THE TURBONAS TS-1635 INTERIOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

qnap turbonas ts 1635 17t                                           Gaining access inside the enclosure is easy, just remove the 9 screws holding it in place from the rear and that's it.

 

 

qnap turbonas ts 1635 18t

The perforated section at the rear of the enclosure is actually placed when the mainboard is.

 

 

qnap turbonas ts 1635 19t

Here we see the two SODIMM slots (one is taken by a 8GB DDR3L module) and a large heatsink placed over the Annapurna AL-514 quad-core Cortex-A15 CPU.

 

 

qnap turbonas ts 1635 20tqnap turbonas ts 1635 21t
Moving further at the back we see the three 92mm exhaust fans and the 250W power supply by FSP.

 

 

qnap turbonas ts 1635 22t

A second heatsink is placed on the opposite side of the board from where the large heatsink is.

 

 

qnap turbonas ts 1635 23tqnap turbonas ts 1635 24t
As QNAP clearly states only one PCIe slot is available and here it is.

 

 

qnap turbonas ts 1635 25tqnap turbonas ts 1635 26t
On the mainboard tray we also see the Etron Tech EJ188H USB 3.0 Host Controller and the 512MB NAND flash memory by Micron.