ASSEMBLY

 Most if not all mounting instructions recommend starting from attaching the backrest to the seat but we like to start with attaching the wheels to the base as seen above.

65mm wheels are not the largest we've seen to date but they don't look out of place with the ONYX Deluxe and that's what matters most.

After that came the class-4 gaslift with its plastic cover.

AK Racing focuses a lot on quality and you can see that just by looking at the base of the seat.

Here we see 4 elastic bands for increased support/comfort and 4 Allen screws used to secure each of the two 3D armrests.

The Z support mechanism attaches onto the seat with 4 Allen screws.

Once again the handles are attached onto the mechanism so you don't have to worry about them falling off.

Each side of the backrest has two Allen screws and a small opening between them.

Of course you can use these screws to attach the backrest on the seat as seen above and then you need to place the plastic side covers over them.

You will need to mount two plastic covers on the left side as seen above.

Now all that's left is for us to place the upper body on the class-4 gaslift.