19 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

TEST BED

 

 

 

 

 

 

 

 

cpuz3930ksystem

 

TESTING METHODOLOGY

 

   Since flash drives are basically plain storage media devices just like solid state drives and hard disk drives we are using almost the same testing methodology to successfully record the achieved performance numbers. The benchmark suites used are HD Tach RW (Read Speeds / Long Bench 32mb Zone Testing), HD Tune Pro (Read speeds), Sisoftware Sandra Pro (Read / Write speeds), AIDA 64 Engineer Edition (Average Linear Read / Random Read speeds), Crystal Disk Mark x64 (100MB-1000MB Read / Write speeds) and finally ATTO (Max Read / Max Write speeds). Every test is repeated a total of 6 times after which the average performance numbers are recorded into our charts (0 = we were unable to complete that test).


   All tests are performed with our main rig running Microsoft Windows 7 Ultimate x64 Service Pack 1 complete with every update until May 25th 2016 (UASP compatible models are tested using a fresh Windows 8.1 installation on a Plextor m6e). As always for comparison purposes in the charts you will also find many other flash drivers which have been tested using the same exact test bench as the one in this review (we really can't keep every flash drive we get forever and also even if we could testing them all again and again would simply not be possible).