29 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

THE DIY SATA DOM 16GB

 

 

 

 

 

 

 

 

 

diy 16gb sata dom 05t

Measuring just 39.54mm in length, 25.28mm in width and 6.8mm in height with a weight of 6.5g the DIY SATA DOM is really tiny.

 

 

diy 16gb sata dom 06t

The barcode along with the serial number are placed on a very small sticker at the rear.

 

 

diy 16gb sata dom 07t

A two pin power connector placed on the left side is used to supply power to the DIY SATA DOM so you can either use the Molex connector found in the bundle or purchase and use a 2 pin power connector if the device you want to use it with has an empty one.

 

 

diy 16gb sata dom 08t

This small switch can be used to write protect the device and thus keep its contents safe.

 

 

diy 16gb sata dom 09t

Due to its tiny size the performance of the DIY SATA DOM is covered by SATA II standards.

 

 

diy 16gb sata dom 10tdiy 16gb sata dom 11t
The above statement may make some people think twice about just how good this product is so we felt necessary to place it right next to a 2.5" SSD and as you can see the difference is massive (roughly 10 times smaller compared to a 2.5" SSD).