28 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

THE PURE BASE 600 WINDOW INTERIOR

 

 

 

 

 

 

 

 

be quiet pure base 600 window 17t

As far as interior space goes the Pure Base 600 Window has plenty (always for a mid-tower).

 

 

Both 5.25" optical drive bays are removable and use regular screws.

 

 

Beneath the 5.25" drive bays we find three individual removable drive cages (each can hold either a single 3.5" drive or two 2.5" ones).

 

 

You can either remove one or more of these cages or move them to one of the two extra mounting areas located right next to the front 140mm Pure Wings 2 fan.

 

 

Worth pointing out is that all three 3.5" drive cages feature anti-vibration silicon pads.

 

 

The mainboard tray has a total of 6 holes for cable management purposes (all rubber dressed).

 

 

All 7 PCI expansion slots use thumbscrews and thus are completely tool-less.

 

 

The PSU area features four short rubber feet and a long perforated section (since you can use PSUs up to 210mm in length that was expected).

 

 

Just like the normal Pure Base 600 the right side panel of the window version is also dressed with a rather thick layer of noise-dampening material.

 

 


Taking a look from the right side of the chassis we see that each of the three 3.5" drive cages is held in place via three thumbscrews.

 

 

There are also two removable 2.5" drive trays placed on this side of the mainboard tray.

 

These are made out of aluminum and are very sturdy.

 

 

Once you remove both side panels you can also remove the fascia which also features a layer of noise-dampening material on its interior.

 

 

As mentioned earlier at the front be quiet! has placed a 140mm Pure Wings 2 fan which can be accompanies by another 140mm fan or replaced with a 240mm radiator (you can also place either three 120mm fans or a 360mm radiator if you remove the optical drive bays – using a 280mm radiator means you lose just the bottom bay).

 

 

By removing both panels you also gain access to the top panel which also features a layer of noise-dampening material (the plastic clips have 2 stages, one which the top panel is completely close and one which is slightly raised).

 

 

Just like the front here you can either mount two 140mm fans, three 120mm fans or a 240/280/360mm radiator.