29 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

BUILDING THE SYSTEM

 

 

 

 

 

 

 

As always the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space.

x2 rindja 27t

Our ATX sized mainboard lands right at the end of three of the mainboard holes used for cable management.

 

 

x2 rindja 28t

This is how you can install the 2.5" drives.

 

 

x2 rindja 29tx2 rindja 30t
One of the 3.5" drives can be installed as seen above and there's also room for two more right beneath it (on the base).

 

 

x2 rindja 31t

There's plenty of room inside the chassis for cooling solutions so you can choose to either mount a 240mm radiator at the top and a 240/360mm radiator at the front or go with a regular CPU air cooler up to 160mm in height.

 

 

x2 rindja 32t

With enough space for even the longest graphics cards you should have no problem mounting a front radiator (you will have no problem with extremely long cards - over 265mm in length - if you install 7mm tall 2.5" drives).

 

 

x2 rindja 33tx2 rindja 34tYou can mount standard and even oversized power supply models at the base of the tower but you may need to forsake one of the 3.5" mounts.