29 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

THE NINETEEN HUNDRED EXTERIOR

 

 

 

 

 

 

 

 

antec 1900 07t

With measurements of 696mm in height, 555mm in depth and 223.6mm in width the Nineteen Hundred is nothing short of massive. The design of the case is quite simple yet thanks to the side window, many corners and front painted dual layer mesh it looks quite unique.

 

 

antec 1900 08t

The left side panel is quite large but for some reason (perhaps lower noise levels) it doesn’t extend over the drive area.

 

 

antec 1900 09tantec 1900 10t
Right beneath both panels we see two smaller panels that fall down (much like the ones we saw with the 900D).

 

 

antec 1900 11t

The dual layer mesh provides air to the three 120mm intake fans placed beneath the fascia (we will talk about them later on).

 

 

antec 1900 12t

Above the three 5.25" bays we see the front I/O which consists by the power and reset buttons, two USB 2.0 ports, four USB 3.0 ports and the standard microphone and headphones plugs.

 

 

antec 1900 13t

A large Antec logo is placed on the lower end.

 

 

antec 1900 14tantec 1900 15t
Part of the top is perforated to allow air to exit from the two 120mm exhaust fans placed beneath it (you can remove the top cover after removing two thumbscrews at the rear).

 

 

antec 1900 16tantec 1900 17tantec 1900 18tantec 1900 19t
The rear comes with an 120mm exhaust fan, a 3-way fan controller for the top and rear fans (the fans are connected to it and in turn it gets powered by a molex power connector), 9 expansion slots with red covers, two rubber grommets and two PSU bays.

 

 

antec 1900 20t

Beneath the bottom PSU bay we see a removable dust-filter.

 

 

antec 1900 21t

Antec has used rubber coated thumbscrews to secure both side panels in place.