28 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

 

 

THE GHOST EXTERIOR

 

 

 

 

 

 

 

 

bitfenix ghost 07t

The design of the Ghost is quite simple and reminds us of several other cases in the market, unfortunately however this time over Bitfenix didn't use their soft-touch rubber material.

 

 

bitfenix ghost 08t

The right side panel of the Ghost features only a handle at the rear much like most cases by Bitfenix.

 

 

bitfenix ghost 09tbitfenix ghost 10t
The front fascia is made by hard plastic and also has two long vertical intake grilles on both sides.

 

 

bitfenix ghost 11t

A rather small Bitfenix logo is placed at the lowest end of the front fascia.

 

 

bitfenix ghost 12t

By default the front door opens from right to left but thanks to the removable hinges you can change that.

 

 

bitfenix ghost 13t

The door comes with a somewhat thick layer of noise dampening material (Serenitek).

 

 

bitfenix ghost 14t

There are three 5.25" and one 1.44" drive bays available.

 

 

bitfenix ghost 15t

Right beneath the drive bays we see a large perforated section.

 

 

bitfenix ghost 16t

The perforated section can be easily removed to reveal two 120mm fan spots (you can install one 140mm instead of two 120mm ones) behind it one of which is already occupied.

 

 

bitfenix ghost 17t

The I/O panel is placed at the top and includes the on/off power button, reset button, 2x USB 2.0 ports, 2x USB 3.0 ports, activity/power LED’s and the typical earphones/microphone audio ports.

 

 

bitfenix ghost 18t

Right above the I/O panel Bitfenix has placed a small compartment which doubles as an 3.5"/2.5" HDD SATA docking station (S4).

 

 

bitfenix ghost 19t

At the rear of the top we see another large perforated section underneath which you can mount either a 240mm radiator, one 230mm fan, one 200mm fan or two 140/120mm fans.

 

 

bitfenix ghost 20t

As expected the rear is also black matte.

 

 

bitfenix ghost 21t

A 120mm exhaust fan is already mounted at the rear right above 3 water cooling grommets.

 

 

bitfenix ghost 22t

The Ghost offers the basic 7 PCI expansion slots as most midi towers (a Kensington lock is placed next to them).

 

 

bitfenix ghost 23t

The PSU as usual gets mounted at the base of the tower.

 

 

bitfenix ghost 24t

Unfortunately the panels are held in place with normal thumbscrews and not rubber coated ones.

 

 

bitfenix ghost 25t

At the bottom of the case we see 4 rubber feet, a long air-filter and two rails used to install Alchemy LED strips (sold separately).