29 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

THE KUHLER H2O H600 PRO

 

 

 

 

 

 

 

 

antec h2o h600 pro 7t Although the H600 Pro has a more "industrial" look compared to its predecessors the end result is one we've seen many times in the past so once again we see a radiator connected to a pump/waterblock combo via two tubes.

 

 

antec h2o h600 pro 8t

The radiator measures 155mm in length, 120mm in width and 27mm in height (thickness).

 

 

antec h2o h600 pro 9t

As you can all see fin quality is very good (each fin is 0.28mm thick).

 

 

antec h2o h600 pro 10t

Antec has given a high density count to the H600 Pro of roughly 16FPI (fins per inch).

 

 

antec h2o h600 pro 11t

The Antec logo is placed on the pump and right over a blue activity LED (the pump is powered by a SATA connector).

 

 

antec h2o h600 pro 12tantec h2o h600 pro 13tAs usual both tubes can swivel roughly 90 degrees to simplify installation.

 

 

antec h2o h600 pro 14t

FEP tubes may not be as flexible as PA ones but we've experienced no real problems with either type in all these years.

 

 

antec h2o h600 pro 15t

The copper base doesn't feature a layer of thermal conductive material so you will need to use either your own or the one that comes in the bundle.

 

 

antec h2o h600 pro 16t

The 7 blade 120mm PWM blue LED fan has a reported speed of up to 2400RPM (1800RPM on the box) to produce airflow of up to 78.9CFM with just 35dBA of noise.

 

 

antec h2o h600 pro 17t

With the 120mm PWM LED fan mounted the thickness of the radiator increases to 52mm.