29 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

 

WEB INTERFACE

 

 

 

 

 

 

ip discovert

If you don't know how to find the IP address of the unit you can use the provided IPCam Discovery tool through which you can also set a static IP.

 

 

activext

The first time you enter the web interface you are required to install an ActiveX control (you may need to head into tools-security-custom level and allow signed/unsigned ActiveX scripts).

 

 

pro1tpro2t
Once you install the ActiveX control you will see the main screen which is also the live feed screen. Unfortunately although both the night vision mode and the overall picture quality are quite good the viewing angle is just not as good.

 

 

pro3t

To zoom you need to use the small window seen in the above picture which is just not as convenient as using the mouse wheel, a feature seen with other similar solutions.

 

 

pro4tpro5tpro6t
Under the video & audio tab you can adjust everything related with the image/video quality, watch/join up to three different IP cameras (regardless of brand) from the same web interface and finally enable/disable the audio input/output.

 

 

pro7tpro8t
Through the network tab you can set a static IP address enable/disable UPNP and DDNS, set the access ports and also add access filters.

 

 

pro9tpro10tpro11t
You can set specific events, setup the motion detector (up to 3 different areas), adjust DI/DO alarm settings and arrange the triggers/time for each event.

 

 

pro12tpro13tpro14tpro15t
In the system page you will can adjust things such as the system and network status, date and time, add/remove users, reboot the unit, reset factory settings, backup the current configuration, perform a firmware update and check the system logs.

 

 

pro16t

The firmware update (if you ever need to perform it) takes a few minutes to complete.