THE VIEW 31 TG INTERIOR

The View 31 TG may not be a very large mid tower but thanks to the lack of any 5.25" bays and room for only three 2.5/3.5" drives it has plenty of interior space.

Here we see the 240/280/360mm radiator area which you can only use with think radiators if you leave the drive cage as is.

The drive cage is fully removable and can accommodate up to three 2.5/3.5" drives.

Once again we find the same plastic drive trays as with most Thermaltake cases lately and we have no complaints.

The drive tray is held in place with two screws placed on the other side of the mainboard tray.

There are many holes for cable management on the mainboard tray but only 5 are rubber coated.

All 10 PCI expansion slots are secured in place with regular thumbscrews.

The dual-slot vertical graphics card mount is a good touch but you will need to purchase a separate riser cable to use it.

You can mount two 120/140mm fans at the base of the chassis right next to the PSU are (you will need to remove the drive cage for the 2nd one).

Taking a look at the rear only reveals the three vertical tray mounts which (can be used with extra trays or the ones in the drive cage).

Here you can see the top of the chassis from the interior.