19 - 03 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

INTRODUCTION

 

 

 

 

 

 

 

 

 

 

enermax ostroga

   So far 2013 hasn't been any different compared to 2012 and so many people i know have a really hard time spending money on PC hardware and who can blame them with the current state of the economy? However you don't necessarily need to pay much to get something good and PC cases is perhaps the only area where casual users can cut down on the cost and not notice any serious impact in the overall performance of their systems. Personally I’ve always favored full towers because of their interior space since that means making my job/life easier when working with them (it also means that i can fit even the largest components in them) but for casual users and gamers midi towers like the latest Ostrog by Enermax which we have here with us today not only cost significantly less but can also come in handy when placed in tight spaces.

 

   Enermax Technology Corporation is a world-renowned PC Power Supply Unit manufacturer. Since our establishment in 1990, we provide power supply products and peripherals like chassis, cooler, fan and keyboard with excellent quality and have won recognitions of consumers around the world. ENERMAX products are recommended by worldwide reviewers, and certain were granted by iF, Red Dot, Good Design and Taiwan Excellence Awards. Those are proven evidence of our top-notch quality and design competency recognized by the professionals. To develop an intensive sales network and better service customers around the world, Enermax has set up branch offices in Germany, France, U.S.A., Japan and China. We also have service offices and distributors in countries across Europe, America, Asia and Oceania. Our farsighted R & D capability is our key strength. The elite teams of Enermax always strive to come up with the best and most satisfactory PSU, thermal solution and peripheral products with cutting-edge design that meets the needs of the market and customers. We will stick to our R & D spirits of “Technology Innovation” and “Quality First” to constantly create products which transcend international standard and requirements to keep up on our product and brand value as well as competitive edge.

 

   Ever since Enermax started the design and manufacture of PC cases they made it clear that this particular product line is aimed towards casual users and gamers and so the introduction of the rather mainstream Ostrog midi tower a while ago was not unexpected. Luckily Enermax gave the Ostrog good looks and a few very convenient and useful features such as a tool-less drive design, ability to add up to a total of 7 fans for excellent airflow levels and plenty of room for the tallest CPU Coolers and longest Graphics Cards. Features aside however the Ostrog follows the typical size limitations most midi towers have and so it's ATX/M-ATX compatible and has a total of 7 PCI expansion slots. But let’s take a closer and more in-depth look on what the budget oriented Ostrog (ECA3250) midi tower by Enermax has to offer.

 


 

 

SPECIFICATIONS AND FEATURES

 

 

 

 

 

 

 

featspecs

 


 

 

PACKAGING AND CONTENTS

 

 

 

 

 

 

 

enermax ostrog 01t

The Ostrog arrived inside a plain cardboard box with the product name (right beneath what seems to be the top of a tower) and the Enermax logo at the lower left corner of both the front and rear.

 

 

enermax ostrog 02t

The model version and color included in the box can be seen on the right side.

 

 

enermax ostrog 03t

Moving at the left side we see the specifications table.

 

 

enermax ostrog 04t

As expected the Ostrog is placed inside a plastic bag and between two foam spacers.

 

 

enermax ostrog 05t

Six 3.5" drive brackets, 8 cable ties, 2 cable straps, extra PCI expansion slot shield, user's manual, case speaker and a bag with all the necessary mounting screws and standoffs.

 


 

 

THE OSTROG EXTERIOR

  

 

 

 

 

 

 

enermax ostrog 06t

Much like most PC Cases nowadays the Ostrog comes in black mate color and looks quite good if i might add.

 

 

enermax ostrog 07t

Instead of featuring a window on the left side panel our particular sample is focused on airflow over looks (there's also a version available with a side window).

 

 

enermax ostrog 08t

So here you can actually install two 120/140mm intake fans to drastically improve the airflow inside the case (the window version has room for 2x120mm ones).

 

 

enermax ostrog 09t

The front fascia is well designed with several edges that give the case an somewhat aggressive look.

 

 

enermax ostrog 10t

The Enermax logo is present on the top front of the fascia.

 

 

enermax ostrog 11t

The Ostrog features four 5.25" drive bays and one 3.5"/1.44FDD bay something we don't see much (most midi towers only have three 5.25" bays).

 

 

enermax ostrog 12t

A white meshed frame surrounds the front fascia adding to the overall looks of the unit (the same frame is also available in black, blue and red).

 

 

enermax ostrog 13t

The product name and logo is placed on the lowest end of the front fascia.

 

 

enermax ostrog 14t

The top I/O features one USB 3.0 port, 3 USB 2.0 ports, reset button, power on/off button, power LED, activity LED, headphone and microphone 3.5mm mini-jacks and the Enermax logo (placed right above it).

 

 

enermax ostrog 15t

At the top of the Ostrog you can also install up to 2x120/140m exhaust fans.

 

 

enermax ostrog 16t

As usual the rear of the case also features a black color but i was surprised to see a handle for easier removal of the left side panel.

 

 

enermax ostrog 17t

An 120mm exhaust fan is present on the rear of the case right beneath two water cooling grommets.

 

 

enermax ostrog 18t

Here we see the usual 7 PCI expansion slots.

 

 

enermax ostrog 19t

Moving to the lower end of the rear as expected we see the power supply space.

 

 

enermax ostrog 20t

Both plates are held in place with rubber coated thumbscrews.

 

 

enermax ostrog 21t

Taking a look at the bottom of the case we see two a large removable air filter placed right beneath the PSU spot and 4 round rubber feet.

 


 

 

THE OSTROG INTERIOR

 

 

 

 

 

 

 

 

enermax ostrog 22t

The interior of the case is also black in color and quite roomy, for a midi tower that is.

 

 

enermax ostrog 23t

As you can see there all four 5.25" bays feature tool-less locking mechanisms (which are quite sturdy btw).

 

 

enermax ostrog 24t

One of those bays comes fitted with a 5.25" to 3.5" adapter.

 

 

enermax ostrog 25t

Right beneath we see the 3.5" drive bay which can either be used for a floppy drive or an 3.5" drive (also features the same locking mechanism).

 

 

enermax ostrog 26t

As usual the 3.5" drive cage is placed right beneath and can support up to 3 drives.

 

 

enermax ostrog 27t

One of the good features Enermax gave the Ostrog is that you can use even the longest graphics cards by removing the HDD cage as seen above.

 

 

enermax ostrog 28t

By doing that you still have room for two 3.5" drives and if you decide to use the Floppy space and one of the 5.25" bays that adds up to 4 drives (who needs more and gets a midi tower?).

 

 

enermax ostrog 29t

The normal ATX size mainboard spacers are pre-installed onto the motherboard tray and aside the quite large CPU hole there are 2 more present for cable management purposes.

 

 

enermax ostrog 30t

Cable management is obviously not its strong card but we've seen worse in the past.

 

 

enermax ostrog 31t

The rear exhaust 120mm fan is regular and comes without any type of protective grill.

 

 

enermax ostrog 32t

All 7 PCI expansion slots are secured via regular screws or thumbscrews (so the Ostrog is not entirely tool-less in design).

 

 

enermax ostrog 33t

The power supply unit sits ontop of 4 rubber anti-vibration feet and right next to it you can mount yet another 120mm intake fan.

 

 

enermax ostrog 34t

Unfirtunately you can't mount a radiator at the top of the case due to space limitations.

 


 

 

BUILDING THE SYSTEM

    

 

 

 

 

 

 

As always the purpose of this section is not to build a fully working system but rather to showcase what you can expect from the case at hand in terms of interior space.

enermax ostrog 35t

Not much room for anything other than an ATX mainboard in the Ostrog (just like with most midi towers).

 

 

enermax ostrog 36t

You can mount even the largest CPU Cooler inside the Ostrog but you should pay extra attention if you also decide to add fans at the top and on the side.

 

 

enermax ostrog 37t

If you decide to use an mGPU solution inside the Ostrog you will have to remove the drive tray.

 

 

enermax ostrog 38t

Fortunately you can use even the longest PSU inside the case (however not recommended).

 


 

 

NOISE LEVEL TEST

  

 

 

 

 

 

 

dba

After giving it much thought we decided on performing noise tests with each PC Case we receive by placing our ExTech HD600 vertically ontop of each case to measure the noise levels emanating from the pre-installed fans at both 50% and 100% with the help of a fan controller. Since however the single pre-installed fan found in the Ostrog features a Molex power connector we only measured it at full speed.

 


 

 

CONCLUSION

 

 

 

 

 

 

 

 

 

enermax ostrogb

   Overall the Enermax Ostrog is a nice midi tower PC case not only because of its design, potential airflow (providing you add extra fans) and space for even the longest graphics cards and tallest CPU Coolers (if you don't use the top side fan) but also because of its surprisingly good build quality and seriously tempting price tag. Granted there are countless PC cases out there better than the Ostrog but if you don’t want to spend more money on the case than you will on the interior hardware components then the Ostrog is a very decent offering. Now i would like to see a front pre-installed 120mm intake fan and a tool-less locking mechanism for the 7 PCI expansion slots but as i always say we just can't have it all.

 

   Moving to the price of the Ostrog well it's just like i said (tempting) and so it currently retails for a price of USD49.99 inside the USA (Amazon) and at around 45Euros inside the EU. So what we have here basically is a midi tower that combines a very nice design, spacious interior, a few convenient features, great airflow potential, nice build quality and a killer price tag, what else is there for anyone to ask? Of course if you plan on spending a reasonable amount of cash on a PC Case then there are better and larger ones out there with more features but for all of you wanting to get your hands on a low cost but worthy midi case then i really doubt you can find anything better, not at this price range.

 

PROS

- Build Quality
- Design
- Spacious Interior (Longest GPUs/Tallest CPU Coolers)
- Removable Drive Cage
- Room For Up To Seven 3.5" Drives
- Airflow Potential (Up To 7 Fans)
- Price

 

 

CONS

- Only 1 Pre-Installed Fan
- Not Entirely Tool-Less